Re-install firmware EZ-WiFi v4

In case of issues when booting …

If there is LED blinking green activity:

1. Let the Ezhotspot Extender remain power on for one minute.
2. Remove any LAN cables connected to the EZhotspot, if any.
3. Press & Hold reset button for 45 seconds and then release.
4. Ezhotspot will reboot with a short Green LED, followed by about 9 minutes of blinking before it becomes stable.
5. Check if the SSID “ez@XXXXXX” is now broadcasting.
6. Remove power and insert power back to EZhotspot to confirm if EZhotspot is performing normal about reboot.

If the LED keeps solid green, please see if the following procedure helps. It requires a manual flashing with some pre-requisites.